蒸汽管道金属蠕变电测仪的研制

从理论和实践两方面对金属材料中蠕变损伤进行了讨论.由其变化与金属内部电阻变化的相关性,提出并研制了一种集无损、准确、灵活、价廉于一体的自动测试系统.这一测试仪器的研制将有利于对金属构件的蠕变损伤的定量研究.     

差压式管道内检测机器人驱动力与速度分析

差压式管道内检测机器人是利用管道中流动介质压力差驱动的检测装置，机器人受力情况及周围流场分布对其运动状态有着重要的影响。通过对检测机器人受力分析和数值模拟，讨论了影响给定机器人驱动力的主要因素，得到了以水为流动介质在水平管道情况下，水流速度与机器人稳态速度的近似关系式，为以后进一步研究机器人定位提供帮助。     

Benders' cuts guided large neighborhood search for the traveling umpire problem

This article introduces the use of Benders' cuts to guide a large neighborhood search to solve the traveling umpire problem, a sports scheduling problem inspired by the real‐life needs of the officials of a sports league. At each time slot, a greedy matching heuristic is used to construct a schedule. When an infeasibility is recognized first a single step backtracking is tried to resolve the infeasibility. If unsuccessful, Benders' cuts are generated to guide a large neighborhood search to ensure feasibility and to improve the solution. Realizing the inherent symmetry present in the problem, a large family of cuts are generated and their effectiveness is tested. The resulting approach is able to find better solutions to many instances of this problem. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

Polynomial‐time approximation scheme for concurrent open shop scheduling with a fixed number of machines to minimize the total weighted completion time

In this article, we consider the concurrent open shop scheduling problem to minimize the total weighted completion time. When the number of machines is arbitrary, the problem has been shown to be inapproximable within a factor of 4/3 ‐ ε for any ε > 0 if the unique games conjecture is true in the literature. We propose a polynomial time approximation scheme for the problem under the restriction that the number of machines is fixed. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

Batch scheduling on a two‐machine jobshop with machine‐dependent setup times

The problem of minimum makespan on an m machine jobshop with unit execution time (UET) jobs (m ≥ 3) is known to be strongly NP‐hard even with no setup times. We focus in this article on the two‐machine case. We assume UET jobs and consider batching with batch availability and machine‐dependent setup times. We introduce an efficient \begin{align*}(O(\sqrt{n}))\end{align*} algorithm, where n is the number of jobs. We then introduce a heuristic for the multimachine case and demonstrate its efficiency for two interesting instances. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

A genetic algorithm with neighborhood search for the resource‐constrained project scheduling problem

The resource‐constrained project scheduling problem (RCPSP) consists of a set of non‐preemptive activities that follow precedence relationship and consume resources. Under the limited amount of the resources, the objective of RCPSP is to find a schedule of the activities to minimize the project makespan. This article presents a new genetic algorithm (GA) by incorporating a local search strategy in GA operators. The local search strategy improves the efficiency of searching the solution space while keeping the randomness of the GA approach. Extensive numerical experiments show that the proposed GA with neighborhood search works well regarding solution quality and computational time compared with existing algorithms in the RCPSP literature, especially for the instances with a large number of activities. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

非线性支撑下悬臂输流管道的Hopf分叉特性

研究了外激励作用下非线性支撑悬臂输流管道系统的Hopf分叉特性,建立了外激励作用下非线性支撑悬臂输流管道系统的动力学方程,并采用Galerkin方法离散动力学方程,由增量谐波平衡(IHB)法推导了方程的近似解析解,由Floquet理论判定了解的稳定性,同时给出了系统的Hopf分叉点。利用数值算法和IHB法研究了支撑位置、支撑结构刚度和阻尼对系统Hopf分叉特性的影响规律。研究表明:系统的幅频特性在Hopf分叉前后发生了改变,响应频率由外激励频率变为系统的自激振动频率,且系统Hopf分叉后,幅值显著增大。该研究结果可为悬臂管道的振动控制提供理论基础。     

Single batch machine scheduling with deliveries

We consider the problem of scheduling a set of n jobs on a single batch machine, where several jobs can be processed simultaneously. Each job j has a processing time p_j and a size s_j. All jobs are available for processing at time 0. The batch machine has a capacity D. Several jobs can be batched together and processed simultaneously, provided that the total size of the jobs in the batch does not exceed D. The processing time of a batch is the largest processing time among all jobs in the batch. There is a single vehicle available for delivery of the finished products to the customer, and the vehicle has capacity K. We assume that K = rD, where and r is an integer. The travel time of the vehicle is T; that is, T is the time from the manufacturer to the customer. Our goal is to find a schedule of the jobs and a delivery plan so that the service span is minimized, where the service span is the time that the last job is delivered to the customer. We show that if the jobs have identical sizes, then we can find a schedule and delivery plan in time such that the service span is minimum. If the jobs have identical processing times, then we can find a schedule and delivery plan in time such that the service span is asymptotically at most 11/9 times the optimal service span. When the jobs have arbitrary processing times and arbitrary sizes, then we can find a schedule and delivery plan in time such that the service span is asymptotically at most twice the optimal service span. We also derive upper bounds of the absolute worst‐case ratios in both cases. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 470–482, 2015     

A sequential scheduling problem with impatient jobs

There are n customers that need to be served. Customer i will only wait in queue for an exponentially distributed time with rate λ_i before departing the system. The service time of customer i has distribution F_i, and on completion of service of customer i a positive reward r_i is earned. There is a single server and the problem is to choose, after each service completion, which currently in queue customer to serve next so as to maximize the expected total return. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 659–663, 2015     

Single machine just‐in‐time scheduling problems with two competing agents

In scheduling problems with two competing agents, each one of the agents has his own set of jobs to be processed and his own objective function, and both share a common processor. In the single‐machine problem studied in this article, the goal is to find a joint schedule that minimizes the total deviation of the job completion times of the first agent from a common due‐date, subject to an upper bound on the maximum deviation of job completion times of the second agent. The problem is shown to be NP‐hard even for a nonrestrictive due‐date, and a pseudopolynomial dynamic program is introduced and tested numerically. For the case of a restrictive due‐date (a sufficiently small due‐date that may restrict the number of early jobs), a faster pseudopolynomial dynamic program is presented. We also study the multiagent case, which is proved to be strongly NP‐hard. A simple heuristic for this case is introduced, which is tested numerically against a lower bound, obtained by extending the dynamic programming algorithm. © 2013 Wiley Periodicals, Inc. Naval Research Logistics 61: 1–16, 2014